Snappy Pure Chlorine Dioxide Kit with Citric Acid ( 1, 2, 4 oz)

Description

Classic Liquid Kit of Chlorine Dioxide with Citric Acid + Sodium Solution 28%

While there are many methods to purify drinking water, using the Chlorine Dioxide Kit with citric acid has emerged as a powerful and reliable way to generate highly effective disinfectant drops for water treatment. The chemical reaction that occurs when these two chemical components are mixed together in equal parts results in the production of chlorine dioxide solution, a potent biocidal that is commonly used for water disinfection and purification purposes.

During the reaction, sodium chlorite acts as the oxidizing agent, while citric acid serves as the reducing agent (activator). The CLO2 gas produced is highly effective in killing bacteria, viruses, and other microbes that may be present in water. It is important to note that this reaction should be carefully controlled to ensure the desired concentration of chlorine dioxide is generated. Proper dosing and mixing techniques are crucial to achieve efficient water disinfection.

Formulated using the highest quality control and premium ingredients, with our chlorine dioxide kits you can have peace of mind knowing that your water is safe to drink and free from harmful pathogens. For your convenience, we offer the two components in two different strengths each: Par A solution in 28%  and 25%, plus Part B in 50% and 35%.

About this Product:

• Composition: Distilled Water (‎H2O), Sodium Chlorite (NaClO2), and Citric Acid  (C₆H₈O₇).
• Use For: Water treatment, food cleaning, and surface sterilization.
• Formulation: Solution.
• Strength Variations: 25% and 22.4% (Part A) | 50% and 35%  (Part B)
• Size Variations: 4 oz | 2 oz | 1 oz  + Air-tight caps and glass droppers.
• Container: Amber Glass Bottles.
• Condition: Freshly prepared product packaged in securely closed and sealed bottles.
• Country of Manufacture: United States.

28% and 22.4% Differences:

The Part A component of the chlorine dioxide kit has a concentration of 28%, which refers to the total weight of sodium chlorite powder contained in the aqueous solution. The remaining 5.6% consists of inert salts used as stabilizers. This means that 22.4% is the actual amount of sodium chlorite by weight in the solution.

Similarly, 25% strength refers to the actual weight of Naclo2 contained in the solution after mixing 31% total weight of this chemical in 69% distilled water. The remaining 6% portion is comprised of common salt added as stabilizing agents.

Shelf Life:

If stored properly, the chlorine dioxide kit with citric acid can remain effective up to 4 years or longer. Each component’s solution (the sodium chlorite and the citric acid) can be stored for extended periods of time without losing their effectiveness. This is particularly beneficial for emergency situations or areas with limited access to clean water.

If you are planning to store this product for a long period of time, amber glass containers with a air-tight screw caps are the best choice for optimal shelf life and protection.

For short term storage, HDPE bottles are a good choice.  HDPE has excellent chemical resistance and is less permeable to gases, providing a good barrier to the corrosive nature of the strong acids and the Naclo2 solutions. However, it is not recommended to use HDPE to store the solutions for longer than 6 months.

Storage Recommendations:

• It is important to store the chlorine dioxide kit at room temperature (below 25°C). Extreme hot temperature may decrease its shelf life.
• Keep both Part A and Part B solutions away from direct sunlight as it can degrade them and reduce their effectiveness. This degradation can lead to a decrease in the concentration of the sodium chlorite and citric acid, which may affect the antimicrobial properties of the water treatment set.
• After every use, make sure both components are properly sealed.
• Store them in a dark place, away from children or pets.
• To maintain the integrity, keep the solutions stored in their original containers.
• Keep bottles labeled. Labels provide important information about the kit usage instructions, storage, and safety warnings.

Disclaimer: These statements have not been evaluated by the Food and Drug Administration. This product is sold and intended to be used for water purification and treatment only. Any consequences resulting from using this product in other applications or in a manner inconsistent with labeling and instructions is the sole responsibility of the user.

Chlorine Dioxide Kit, or 28% Sodium Chlorite Solution is not approved by the FDA or EPA for internal use or to cure any health condition. As stated on its website, “The FDA has warned consumers about the dangers of Miracle or Master Mineral Solution, Miracle Mineral Supplement, MMS, Chlorine Dioxide (CD) Protocol, Water Purification Solution (WPS) and other similar products“.

For more information on MMS and their uses and warnings, you can refer to the following resources: 2019 FDA Warning and 2010 FDA Warning.